RCTECH full solution for ATM, safes and bank protection, details the SesMo & SesMo PRO applications when interfaced to other devices for full solution. This presentation shows RCTECH full solution for ATM and Bank Protection.

SesMo for Bank & High Risk Sites Security
SesMo protection range in colors

SesMo is a combined seismic detector used to protect bank safes, media safes, strong rooms, automatic ticket machines, vending machines, telephones post, military sites and cash dispensers. Interfacing the SesMo to any intrusion control panels is very simple.

The SesMo react to all types of attack tools known today: Oxygen lances, steel and diamond bit drills, hydraulic pressing tools and explosives.

The SesMo integrates three technologies for an efficient detection: Seismic (Bimorph sensor), light and heat.

• SesMo covers 20 meters/square (depends on the surface material and specifications).
• The SesMo become integral in the latest protection pack in banks security, post offices, money change shops, diamond shops, weapon storage and military sites all over the world.
• SesMo is the only sensor in the world that combines three (3) detection methods in one essential unit, this feature provides high security and early burglary attempt detection.

LEARN MORE...

SesMo, Seismic Sensor for Safes

The SesMoTM Seismic, Heat and Light detector is suitable for the detection of most known attacks on metal & concrete objects Combined Seismic sensor for safes Three Sensors in one detector Three Detection technologies: Seismic (Bimorph sensor), light and heat. Provide full protection to Teller Machines, & Banks Safes Deposit Applicable for wall protection shock sensor Low, Medium and High Sensitivity (adjustable) Tamper Protected Setting and adjustments by simple DIP switch Relay Output at N.C. mode Compatible withmost intrusion control panels Few types are available: SesMo PRO (in metal box), SesMo NLH, SesMo NLH 65

Dimensions: 90 X 85 X 50 mm

Safe Deposit Sensor - Technical Aspects

Electrical and RF noise
RCTECH Safe Deposit Sensor called SesMo. The SesMo includes three integrated sensors: Heat, Light & Seismic. Most used for bank security systems, cash machines and similar.
The SesMo contains electrical interference protection and RFI problems are well filtered. The SesMo had been tested at a 1-meter distance with full spectrum RF noise from 50 to 1800 MHz.
Airborne effect
The signal analysis is independent from the airborne sound. The SesMo installation is permitted inside or outside the protected area. If it’s metal container for example installing the SesMo at the outside walls it’s permitted, consider rain, snow or other that may effect the SesMo.
The standard SesMo ABS housing is for indoor Safe Deposit Sensor applications only. For approved installation we offer the metal case SesMo – Details below.
Calibration
The inertia sensor sensitivity and the response time can be programmed in order to prevent false alarms. The SesMo filters and signal processor test the signal to certain parameters before alarm signal.
When the protected Safe Deposit Sensor or container is solid and steady even in the highest sensitivity, the sensor does not cause false alarms, as the internal filters and signal processor are limited to a certain range.
Frequency range is from 72 Hz to 18.50 KHz, with certain internal filters that narrows the frequency response to certain groups.
Special filtering circuitry makes the unit is immune to environmental noises like low flight jets, very big automobiles (trucks, buses, etc) exhausts and other airborne effects.
In airports for example, use medium sensitivity and two pulses count when using the SesMo Safe Deposit Sensor.
Testing the SesMo
General:
As few customers asked for combined testing too, we regret to inform that we are still trying to arrange the tester at a reasonable price; this is not simple. Many customers appreciated the current situation that saves them the $ 200 test tool cost.
In details:
Light detection is tested by simple handy flashlight (reflector type) with 6V, 10W bulb. Direct the light to the SesMo location when you stand at 0.5 meter far.
Heat detection is set to detect at 80 degrees Celsius in a 1x1 meter metal cabinet. To test the SesMo for heat you need to remove the ABS housing first (may melt by heat), then use a simple 1000W heat fan (for dress settings), turn it on at 0.5 meter from the SesMo, at 20 degrees Celsius the SesMo detects the heat within 30 seconds or less.
Breaking detection: For Safe Deposit Sensor materials a 0.2 KG hammer does the testing job perfectly. When testing in softer surfaces (wood walls), use a plastic head hammer. Consider that a burglar uses 5 to 30 kg hammer while breaking in.

Most projects managers accept such test. It’s recommended to perform the test at 20-30 centimeters from the SesMo; after three (hammer) knocks, the SesMo is supposed to trigger an alarm.
The coverage area is depends on the surface material, as there are so many types of materials we can’t provide a full list.

Our most updated surface list and coverage for the Safe Deposit Sensor:

• Safe deposit with 30 mm metal walls – 17 meters/square
• Safe deposit with 50 mm metal walls – 15 meters/square
• ATM machines with 5 mm metal surface - 19 meters/square
• Concrete walls with 50 mm walls - 25 meters/square

This information is not accurate, as the Safe Deposit Sensor surface material, structure and design affect the SesMo coverage dramatically.
Few new versions are comming soon! Contcat us for the latest news

Common Q and A

Please contcat us for the full article.